Maytronics Australia
Maytronics Australia is a manufacturer and distributor of pool robotics and water treatment in Oceania/South East Asia.
What to do if the power supply or power supply switch light is not working?
“Things to try if the power supply or power supply switch light is not working: Check power to the socket and reconnect the Pool Cleaner. Check that there is voltage in the power socket in the wall.”
View in the company profileMy robotic pool cleaner slips and can't climb the wall — what should I do?
“The most common reason robotic pool cleaners suddenly stop climbing your pool wall is because the surface becomes slippery due to algae build-up. When algae starts to build up in your pool it forms a thin transparent film over the hard surface of your pool.”
View in the company profileHow to fix the Pool Cleaner motor?
“To fix the Pool Cleaner motor: Remove the impeller tube and clean the impeller. Clean the tracks and wheels. If the issue persists, consult with your dealer and Service Center.”
View in the company profileHow to stop the Pool Cleaner moving in circles?
“Possible reasons and corrective actions: Remove dirt from moving parts. Clean filter bag/basket/cartridge. Remove debris stuck in the impeller-house or impeller-cover. Place the power supply in a position so that the Pool Cleaner can reach all walls. Lock the bottom lid in the right position. Correct pool and water conditions. Refer to the pool cleaner manual on the product page.”
View in the company profile